About this item
-
Half tower at the head end — A load-bearing stainless-steel tower rises to 188 cm (74 in) and carries a push-through bar and a roll-back bar. Its surface has an anti-oxidation treatment that resists deformation over long-term use.
-
Piano-wire carriage springs — High-strength carbon-steel piano-wire springs give high tensile strength and fatigue resistance, and the multi-position spring setup lets you change the load between exercises.
-
Maple, rubberwood or beech frame — Choose the wood that suits your room. Every frame is finished with a water-based, low-odor coating that dries to a hard, wear-resistant and water-resistant film.
-
Microfiber over dense foam — Microfiber upholstery is wear-resistant, stain-resistant and breathable. The padded box is filled with high-density foam that keeps its shape and resists sagging.
-
Adjustable head and shoulder supports — Thickly padded shoulder rests and headrest adjust for comfort, and a stainless-steel position adjuster locks securely into multiple settings for different body sizes.
-
Wheels and a padded stop board — Transport wheels let you roll the frame across the room without marking the floor, and a protective stop board sits at the end of the carriage travel.
Product description
Overview
The Wood Reformer with Half Tower pairs a full-length reformer with a stainless-steel half tower mounted at the head end. You get the sliding carriage, footbar and straps of a classic reformer, plus a push-through bar and roll-back bar overhead, all on one solid wood frame measuring 229 × 67 cm with the tower standing 188 cm high.
Who it suits
It suits a home studio or a small private studio that wants to add tower exercises without giving floor space to a separate cadillac. Instructors teaching one-to-one sessions may also find it a practical way to offer reformer and tower work in a single station. The three wood options let you match existing furniture or flooring.
In use
On the carriage, the frame supports the familiar reformer families: footwork, rowing and arm series in the straps, short box work on the padded box, and kneeling and standing work on the carriage. At the tower end, the push-through bar works for roll-downs, push-through sequences and supported stretches, while the roll-back bar suits seated roll-backs and spinal articulation. Springs set the resistance; adding or removing springs changes how much assistance or load you work with.
Materials and build
- Frame: solid maple, rubberwood or beech, with aluminum alloy brackets reinforcing the legs and a water-based, low-odor finish.
- Tower: load-bearing stainless steel with an anti-oxidation surface treatment.
- Springs: high-strength carbon-steel piano wire with multiple adjustment positions.
- Upholstery: microfiber over high-density foam, with a rounded, padded grip on the push-through bar.
- Adjustments: stainless-steel position adjuster, adjustable headrest and shoulder rests.
Space planning
The frame is 229 × 67 cm (90 × 26 in), and the tower reaches 188 cm (74 in). Allow about 2 ft (60 cm) of clearance on each side for getting on and off and for strap work, which means a floor area of roughly 349 × 187 cm (137 × 74 in). A standard 8 ft (244 cm) ceiling leaves around 56 cm (22 in) above the tower for overhead bar work.
Setup and care
The reformer ships for home assembly with hardware and printed instructions. Wipe the upholstery with a damp cloth and mild soap, and dust the wood with a soft, dry cloth, keeping it away from standing water and direct heat. Check springs, straps and tower fixings regularly and tighten any hardware that has settled after the first few weeks of use.
One frame, two training stations
The reformer carriage runs the full length of the wood frame, and the half tower stands at the head end. Moving from footwork on the carriage to push-through work at the tower takes a moment, with no second machine to set up and no extra floor space to give up.
Push-through and roll-back bars
The stainless-steel tower carries a push-through bar with a rounded, padded grip and a roll-back bar for seated work. Springs attach at multiple positions on the tower, so you can choose how much support or resistance each exercise gets, from assisted roll-downs to firmer pressing work.
Warm wood, three choices
Maple, rubberwood and beech share the same frame design, half tower and spring layout, so the choice comes down to color and grain. A water-based, low-odor finish protects the wood with a hard film that resists wear and moisture, and keeps the frame looking calm in a living space.
A comfortable carriage
Microfiber upholstery over high-density foam keeps the carriage and padded box supportive session after session, and resists sagging over time. The adjustable headrest and thick shoulder rests help you settle into a steady starting position before each series.
Easy to reposition
Transport wheels at one end let you tilt and roll the frame to clean underneath or rearrange the room, without dragging it across the floor. The wheels are designed to move smoothly without marking wood, tile or vinyl flooring.
A closer look
Specifications
| Dimensions (L × W × H) | 90 × 26 × 74 in (229 × 67 cm; 188 cm high with tower) |
|---|---|
| Options | Frame material: Beech, Maple, Rubberwood |
| Frame | Solid wood frame (maple, rubberwood or beechwood by variation); water-based, low-odor finish |
| Tower | Single-end half tower in load-bearing stainless steel, with push-through and roll-back bars |
| Upholstery | Microfiber upholstery |
| Country of origin | China |
| Rated for | Home use |
| Assembly | Assembly required · hardware and printed instructions included |
| Warranty | Linden & Spring Limited Warranty: 5 years frame · 1 year springs · 365 days upholstery |
Dimensions
What's in the box
- Wood reformer carriage and frame
- Half tower post with push-through and roll-back bars
- Transport wheels
- Hardware kit and assembly instructions
Only the items listed above are included. Accessories that appear in some photos, such as a sitting box or jump board, ship only when they are listed here.
Springs
Spring colors aren't standard across brands — use this chart, not another studio's.Compare similar apparatus
Swipe sideways to compare →| Compare |
Wood Reformer with Half Tower
From $2,890
|
Aluminum Reformer with Half Tower
From $2,990
|
|---|---|---|
| Best for | Reformer training plus tower work in one frame | An aluminum-frame half-tower reformer with tower accessories included |
| Frame | Solid wood frame (maple, rubberwood or beechwood by variation); water-based, low-odor finish | Aluminum alloy frame with wood trim |
| Upholstery | Microfiber upholstery | Microfiber leather over high-density foam padding |
| Rated for | Home use | Home use |
| Footprint | 90 × 26 in | 93 × 27 in |
| Height | 74 in | 74 in |
Reviews
No reviews yet. Reviews on this page come only from verified owners, after delivery — every verified review is published, good or bad.
Write a reviewMaple, rubberwood or beech. All three use the same frame design, half tower and spring layout, so the choice comes down to color and grain.
The tower stands 188 cm (74 in) high. A standard 8 ft (244 cm) ceiling leaves comfortable room above the tower for push-through and roll-back work.
No. This is a fixed frame. Transport wheels make it easy to move to a wall or another room when you need the floor space.
Yes. Upholstery colors are available on request; tell us your preference when you order.
Yes. It arrives with hardware and printed instructions for home assembly.
It is a studio-style frame sized for home studios and small private studios. For details on coverage, see the Linden & Spring Limited Warranty.
We don't accept change-of-mind returns. If something arrives damaged or has a defect, we replace or refund it at no cost to you. For any other return, contact us first: returns need our written approval, must be unused and in the original packaging, are shipped back at your cost and carry a 15% restocking fee.
